SKIN CARE - PROTOTYPE FORMULATION

Stimulating Cream Gel
  INCI Names %w/w
A. Cyclopentasiloxane, Dimethicone Crosspolymer 6.0
  Sodium Polyacrylate and Ethylhexyl Stearate and HEC and trideceth- 6 (Natursol A100) 1.5
B. Water ad 100
  Sorbitol 4.0
C. Bifida Ferment Lysate 5.0
  Phenoxyethanol, Methylparaben, Ethylparaben, Butylparaben, Propylparaben, Isobutylparaben 0.8

PROCEDURE
1. Mix A separately.
2. Mix B to A and stir/homogenise at approx 3000 rpm for 20 minutes to develop maximum viscosity and stability..
3. Add C while stirring. Homogenize for 3 min.

The information on product specifications provided herein is only binding to the extent confirmed by Rheolab in a written Sales Agreement. Rheolab EXPRESSLY DISCLAIMS ANY RESPONSIBILITY FOR THE SUITABILITY OF THE PRODUCTS FOR ANY SPECIFIC OR PARTICULAR PURPOSES INTENDED BY THE USER. Suggestions for the use and application of the products and prototype formulations are given for information purposes only and without any warranty or undertaking . Rheolab customers will need to test the products as to their suitability for the customer’s intended processes and purposes. Rheolab does not assume any liability or risk involved in the use of its products as the conditions of use are beyond its control. The user of the products is solely responsible for compliance with all laws and regulations applying to the use of the products, including intellectual property rights of third parties.

Rheolab recommend de-ionised water be used in all prototype formulations.

Rheolab consider any preservative system inclusive in a form to be adequate, but have not carried out challenge tests to verify microbial integrity.

 ISSUE 1/ JANUARY 2009

Copyright © 2011 Rheolab